HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: IA3004-ME10A (Rohm)

Image Sensor Heads For Narrow-width Scanners

 

Скачать: PDF   ZIP
Rohm
IA3004-ME10A
Contact image sensor heads
1/4
Image sensor heads for narrow-width scanners
IA3004-ME10A


Equipped with the sensor chips that have built-in analog memory, this compact color image sensor head is suitable for
any scanning applications that require rapid scanning of widths of up to A6. It best fits into the photo graphic applications.

Applications
Check readers, card scanners, and a variety of other image input devices.

Features
1) By integrating the signal amplifier on the sensor chip, external noise is shut out. Additionally, newly developed analog
memory circuit and realizes high speed scanning.
2) The LED light source is mounted on the same substrate as the sensor chip which makes it possible to package the
device with lighter weight and an extremely small size.
3) With the proprietary prism(reflectors), the output signal is maintained uniformly.
4) The ceramic substrate is used for excellent dimensional accuracy and thermal stability.
Variation and maximize the image re-productivity.

External dimensions (Unit : mm)
2.5
(10.4)
Max. 1.5
103(Effective Reading Width:103)
(3.8)
Max.2
Pin No.
Pin No.
Signal
Signal
No.1
No.2
No.3
No.4
No.5
No.6
No.7
Ao
GND
SI
CLK
V
DD
GLED
A
L
C
No.7
No.1
No.1 Pixel
VLED
Note) Deflection at the top of glass : 0 to 0.25
Projection to platen is positive
Socket Housing : IL-Z-7S-S125C3(JAE)
Socket Contact : IL-Z-C3-A-15000(JAE)
119.5 0.3
+
-
0.25
17.5
+ -
12.5 0.05
+-
25 1
+
-
15.5 1
+
-
5 0.1
+
-
2 0.05
+
-
10.36 0.4
+ -
0.3
5.5
+
-
5.5 0.3
+-
Depth1


IA3004-ME10A
Contact image sensor heads
2/4
Characteristics
Parameter
SLT
CLK
103
300
1216
5
0.5
2.5
0.5
0.25
1.0
0.4
5 to 45
mm
dpi
dots
V
ms / line
MHz
V
V
V
C
Symbol
Typ.
Unit
VRMin.
VRMax.
-
-
-
-
Vod
V
DD
Effective scanning width
Primary scan dot density
Total dot number
Power supply voltage
Scanning speed
Clock frequency
Maximum dynamic range
Minimum dynamic range
Dark output
Operating temperature

Pin assignments
CLK
Circuit
Ao
No.
Analog output
Ground
Serial-in
Clock
Power supply
LED ground
LED power supply
1
2
3
4
5
6
7
O
I
I
I
I
I
I
I / O
Functions
GND
G-LED
V-LED
Sl
V
DD























IA3004-ME10A
Contact image sensor heads
3/4
Timing chart
(a) CLK Timing Chart
ts
tHOLD
tSETUP
twL
1/fCLK
CLK
twH
0
1
11
12
13
SI
Ao
1 pixel
2 pixel
Fig.1
tpd

(b) Data Output Timing Chart
After turning on the SI pulse, the analog output shape starts from the setting up point of 12 clock pulse.
CLK
0
1
Note) Output blank part cannot be used as tha analog output standard level.
10
12
14
16
SI
Ao















IA3004-ME10A
Contact image sensor heads
4/4
Equivalent circuit
V
D D
G N D
A
O
S I
C L K
V
L E D
G
L E D
1 2 1 6 B I T S H I F T R E G I S T E R
0 . 1
F
3
1
1 2 1 6
F i g . 2
Appendix
Appendix1-Rev1.0


The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
© 2017 • ChipFind
Контакты
Главная страница