HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: YL-70N (MCE KDI Integrated Products)

Power Dividers, In-phase 2-Way, Freq. Range = 0.5-18 GHZ

 

Скачать: PDF   ZIP
 
IN-PHASE 2-WAY SMA & TYPE N
DIVIDERS/COMBINER, POWER
SERIES YL
0.5-18 GHz
GENERAL SPECIFICATIONS
Frequency Range: 0.5-18.0 GHz
RF Impedance: 50 Ohms
RF Power: The power handling capability for load
VSWR's less than 1.50 is 1 watt CW
and 1kW peak for frequencies up to 2.0
GHz, and 400 mW CW and 0.4 kW
peak for frequencies from 2.0 GHz to
18.0 GHz.
Operating Temperature: 55C to +85C
Connectors: SMA or Type N Female
MECHANICAL OUTLINES
Out- A B C D E
Line in[mm] in[mm] in[mm] in[mm] in[mm]
1 0.85[21,6] 0.82[20,83] 0.650[16,51] 0.38[9,65] 0.20[5,1]
2 0.85[21,6] 0.75[19,1] 0.650[16,51] 0.30[7,6] 0.20[5,1]
3 0.85[21,6] 1.00[25,4] 0.650[16,51] 0.50[12,7] 0.20[5,1]
4 1.00[25,4] 1.75[44,45] 0.800[20,3] 0.88[22,35] 0.20[5,1]
5 0.80[20,3] 1.25[31,75] 0.600[15,2] 0.63[16,0] 0.20[5,1]
6 1.30[33,02] 1.75[44,45] 1.100[27,94] 0.88[22,35] 0.20[5,1]
7 2.00[50,8] 1.53[38,86] 1.750[44,45] 0.50[12,7] 0.20[5,1]
8 2.00[50,8] 1.73[43,94 1.750[44,45] 0.70[17,8] 0.50[12,7]
9 2.00[50,8] 1.45[36,8] 1.750[44,45] 0.88[22,35] 0.50[12,7]
10 2.00[50,8] 1.15[29,21] 1.750[44,45] 0.50[12,7] 0.50[12,7]
ELECTRICAL PERFORMANCE
Frequency Maximum Maximum Minimum Phase Amplitude Outline
Range In/Out Insertion Isolation Balance Balance Fig. 1, 2 Fig. 2, 3
Model No.* GHz VSWR Loss dB dB Degrees dB SMA Type N
YL-70 YL-70N 0.5-2.0 1.25/1.20 0.5 20** 2 0.2 6 9
YL-23 YL-23N 1.0-2.0 1.25/1.20 0.3 20 2 0.2 4 8
YL-71 YL-71N 1.0-4.0 1.30/1.20 0.5 20 2 0.2 4 8
YL-25 YL-25N 1.5-3.0 1.25/1.20 0.3 20 3 0.2 5 7
YL-33 YL-33N 2.0-4.0 1.25/1.20 0.3 21 3 0.2 3 7
YL-48 YL-48N 4.0-8.0 1.30/1.25 0.4 18 4 0.3 2 7
YL-74 N/A 6.0-18.0 1.50/1.40 1.0 16 6 0.4 1 N/A
YL-90 YL-90N 8.0-12.4 1.40/1.35 0.6 18 3 0.2 1 10
YL-92 N/A 12.0-18.0 1.50/1.40 0.7 18 6 0.3 1 N/A
* Units with Type N connectors: up to 4GHz multiply VSWR's by 1.05 and subtract 2 dB from isolation. Above
4GHz multiply VSWR's by 1.10 and subtract 3dB from isolation.
** Greater than 30 dB over most of the frequency band.
.38[9,7]
0.10[2,5]
SMA FEMALE
TYP.
.38[9,7]
TYP.
B/2
A/2
B
A
C
E
IN
OUT OUT
0.093[2,36]
DIA. THRU
2 MOUNTING
HOLES
1.00
[25,4]
N FEMALE
TYP.
0.50[12,7]
TYP.
.13[3,3]
B/2
A/2
B
A
C
IN
OUT OUT
0.125[3,18]DIA. THRU
2 MOUNTINGHOLES
0.74[18,8] TYP.
FIGURE 1 SERIES YL
FIGURE 2 SERIES YL-N
11-5-02
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
email: sales@mcekdi-integrated.com
See us on the web @ www.mcekdi-integrated.com
An MCE Company
TRIANGLE
C O R P O R A T I O N
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
E-Mail: kdisales@aol.com
See us on the web @ www.kditriangle.com
10/98
ELECTRICAL SPECIFICATIONS
Model: D357MS
Connectors: TNC
Frequency Range: 850-900 MHz
Insertion Loss: 3.30 dB Maximum, 3.10 dB Typical
Isolation: 22.0 dB Minimum
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 1 Maximum
VSWR Input: 1.20:1 Typical
Output: 1.35:1 Typical
Operating Temperature: 30 to +70 C
Note:
As a combiner input power is 2 watts maximum per port.
Each input port is able to handle 5 watts if proper heat sink is used.
ELECTRICAL SPECIFICATIONS
Model: D392HS
Connectors: TNC
Frequency Range: 810-920 MHz
Insertion Loss: 0.2 dB Maximum
VSWR: 1.2:1 Maximum
Isolation: 22 dB Minimum
Amplitude Balance: 0.1 dB Maximum
Phase Balance: 1 Maximum
RF Power: 1 W at each of the combined ports
Third Ord Incp: +40 dBm Minimum
OperatingTemperature: 30 to +70 C
ELECTRICAL SPECIFICATIONS
Model: D313MS-3
Connectors: SMA
Frequency Range: 0.8-2.0 GHz
VSWR: 1.25:1 Maximum J1-J3
Isolation: 20 dB Minimum J2-J3
Insertion Loss: 3.5 dB Maximum J1-J2 + J1-J3
Internal Load Protection: 0.15 watts Maximum
Input Power: 1 watt Maximum
Amplitude Balance: 0.1 dB
Phase Balance: 2 Maximum
OperatingTemperature: 30 to +70 C
1.34
[34,04]
2.68
[68,07]
.45[11,4]
1.78
[45,21]
1.00[25,4]
2.00[50,8]
.75
[19,1]
.156[39,62] DIA. THRU
2 HOLES
2.38
[60,45]
.15
[3,8]
MATES WITH TYPE `TNC`
MALE CONNECTOR PER
MIL-C-39012
3 PLCS
KDI
64537
D357MS
D/C
S
JI
J2
.38
[9,7]
.60
[15,2]
.48
[12,19]
.65
[16,5]
1.62[41,15]
1.18[29,97]
.63
[16,0]
.63
[16,0]
1.26
[32,0]
.75
[19,1]
.02[0,51]
FINISH
BUILD UP
M3x 0.5-6H,
4mm MIN DP
2 MTG HOLES
FARSIDE
MATES WITH "TNC"MALE
CONN PER MIL-C-39012
3 PLS
.22
[5,59]
.31
[7,87]
KDI
64537
D392HS
D/C
.81
[20,57]
2.00
[50,8]
3.30[83,82]
MATE WITH SMA MALE
CONNECTOR PER MIL-C-39012
(3) PLACES
J3 J2
J1
.75
[19,1]
KDI
64537
D313MS-3
D/C
.25[6,4] DIA. THRU
(2) PLACES
.50
[12,7]
2.30[58,4]
.78
[19,81]
.25
[6,4]
2.80[71,1]
1.15[29,2]
1.00
[25,4]
.06
[1,52]
2 WAY
DIVIDER/COMBINER, POWER
10/98
An MCE Company
TRIANGLE
C O R P O R A T I O N
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
E-Mail: kdisales@aol.com
See us on the web @ www.kditriangle.com
2 WAY
DIVIDER/COMBINER, POWER
ELECTRICAL SPECIFICATIONS
Model: D313MS-4
Connectors: SMA
Frequency Range: 0.8-2.0 GHz
VSWR: 1.25:1 Maximum J1-J3
Isolation: 20 dB Minimum J2-J3
Insertion Loss: 3.5 dB Maximum J1-J2; J1-J3
Amplitude Balance: 0.1 dB Maximum
Phase Balance: 2 Maximum
Internal Load Dissipation: 0.150 Watts Maximum
Operating Temperature: 30 to +70 C
ELECTRICAL SPECIFICATIONS
Model: D301LS
Connectors: Type N
Frequency Range: 880-894 MHz
Insertion Loss: 3.8 dB Maximum
VSWR: 1.30 Maximum
Isolation: 25 dB Minimum
RF Power: 1 Watt combined total
Amplitude Balance: 0.1 dB Maximum
Phase Balance: 1.0 Maximum
Operating Temperature: 55 C to +85 C
ELECTRICAL SPECIFICATIONS
Model: D353MS
Connectors: Type N
Frequency Range: 0.5-2.0 GHz
VSWR: 1.4:1 Typical
Isolation: 18 dB Minimum
Insertion Loss: 3.8 dB Maximum
Input Power: Unit operates as divider
1 KW Peak Maximum
Duty cycle 1.1% Maximum
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 5 Maximum
Operating Temperature: 30 C to +70 C
2.00
[50,8]
4.00
.05
[101,6
1,3]
MATE WITH SMA MALE
CONNECTOR PER MIL-C-39012
(3) PLACES
.25
[6,4]
3.50[88,9]
1.00
[25,4]
.75
[19,1]
.63
[16,0]
1.00
[25,4]
.16[4,06]
R TYP
.06
[1,52]
.50
[12,7]
3.00[76,2]
.12[3,05]
R MAX. TYP
.06[1,52]
R MAX TYP
2.605[66,17]
#4-40 X .62[15,75] SCREW
2 PLS
.06[1,52]
TYP
KDI
64537
D313MS-4
D/C
.175[4,45] DIA.
2 PLS
J2
J1
1.80
[45,7]
.40
[10,2]
1.00
[25,4]
.90
[22,9]
.15
[3,8]
1.500
[38,1]
1.50
[38,1]
.75
[19,1]
.75[19,1]
3 PLS
1.00
[25,4]
.60
[15,2]
J3
.15[3,8] DIA. MOUNT. HOLE
2 PLS
N TYPE CONN. FEM.
PER MIL-C-39012/2
3 PLS
KDI
64537
D301LS
D/C
.13
[3,30]
1.750[44,5]
2.00[50,8]
.75
[19,1]
MATES WITH TYPE`N`MALE
CONN PER MIL-C-39012
3 PLS
KDI
64537
D353MS
S/N
D/C
1.00[25,4]
.59[14,99] TYP
3 PLS
2.85
[72,4]
1.43
[36,32]
.38
[9,65]
.50
[12,7]
1.000
[25,4]
.150[3,8] DIA THRU
2 MTG HOLES
An MCE Company
TRIANGLE
C O R P O R A T I O N
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
E-Mail: kdisales@aol.com
See us on the web @ www.kditriangle.com
10/98
3 WAY
DIVIDERS/COMBINERS, POWER
.45
[11,4]
1.00
[25,4]
1.00
[25,4]
J2 J3 J4
J1
.75
[19,1]
.75[19,1]
4 PLS.
1.50
[38,1]
.15
[3,8]
2.600[66,04]
N TYPE CONN. FEM.
PER MIL-C-39012/2
4 PLS.
J4
.15[3,8] DIA. THRU
MOUNTING HOLE
2 PLS.
1.00
[25,4]
.60
[15,2]
1.45[36,8]
2.90[73,7]
KDI
64537
D302LS
D/C
ELECTRICAL SPECIFICATIONS
Model: D396LS
Connectors: SMA
Frequency: 820-900 MHz
VSWR: 1.3:1 Maximum
Isolation: 20 dB Minimum
Insertion Loss: 5.4 dB Maximum (incl. div. loss)
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 2 dB Maximum
RF Power: 1 watt Maximum (at input as divider)
Operating Temperature: 0 to +70C
ELECTRICAL SPECIFICATIONS
Model: D302LS
Connectors: Type N
Frequency: 880-894 MHz
Insertion Loss: 5.4 dB Maximum
VSWR: 1.25 Maximum
Isolation: 30 dB Minimum
RF Power 1 Watt combined total
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 2 dB Maximum
Operating Temperature: 55 to +85 C
.
KDI
64537
D396LS
D/C
J1 J2 J3
INPUT
.75
[19,1]
1.50
[38,1]
.16
[4,06]
1.00[25,4]
1.670[42,42]
2.00[50,8]
.50
[12,7]
.500
[12,7]
.27[6,86] TYP.
.25
[6,4]
.50
[12,7]
.172
.005
[4,369
0.13] DIA.
MOUNTING HOLE
2 PLACES
MATES WITH SMA MALE
CONNECTOR PER MIL-C-39012
4 PLACES
ELECTRICAL SPECIFICATIONS
Model: D336LS
Connectors: Type N
Frequency: 880-900 MHz
Insertion Loss: 5.6 dB Minimum
Isolation: 20 dB Minimum
VSWR: 1.30:1 Maximum
Amplitude Balance: 0.6 dB Maximum
Phase Balance: 2 dB Maximum
Internal termination not to dissipate more than 75 W over the tem-
perature range of 55 to 85 C at the mounting surface.
WHEN USED AS A POWER DIVIDER
Power In Maximum Ret. Loss*
25W 0 dB
50W 0 dB
100W 2 dB
300W 7 dB
500W 13 dB
*At outputs any phase
KDI
64537
D336LS
D/C
.150[3,8] DIA. THRU
4 PLACES
MATES WITH TYPE `N` MALE
CONN PER MIL-C-39012
4 PLS.
MTG. SURFACE TO BE
FREE OF PAINT
1.50
[38,1]
3.00
[76,2]
2.700
[68,6]
.15
[3,8]
.50 [12,7]
1.000
[25,4]
1.000
[25,4]
2.400[61,0]
4.36[110,74]
.45[11,4]
TYP.
1.00
[25,4]
.59
[14,99]
.59
[14,99]
1.10
[27,9]
10/98
An MCE Company
TRIANGLE
C O R P O R A T I O N
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
E-Mail: kdisales@aol.com
See us on the web @ www.kditriangle.com
3 WAY
DIVIDERS/COMBINERS, POWER
3.00[76,2]
.56
[14,2]
.24[6,1]
1.250
[31,75]
2.50
[63,5]
KDI
64537
D364MS
S/N
D/C
1.50[38,1]
TYP
.75
[19,1]
.75
[19,1]
.12
[3,1]
.125[3,18] DIA.
2 PLS
MATES WITH
SMA MALE CONNECTOR
PER MIL-C-39012
4 PLCS
2.750[69,85]
1.75[44,5]
1.590[40,39]
.375
[9,53]
2.000
[50,80]
.50
[12,7]
.875
[22,23]
1.125
[28,58]
.50[12,7]
.75[19,1]
.50[12,7]
.50[12,7]
2.75
[69,9]
.250
[6,4]
.101[2,57] DIA. THRU
2 MTG HOLES
2-56 UNC-2B
X .19[4,8] DP
2 MTG HOLES
SMA FEMALE CONNECTOR
RECEPTACLE PER MIL-C-39012
4 PLCS
J
1
J
2
J
3
I
N
KDI
64537
D306NS
D/C
1.34
[34,0]
2.68
[68,1]
.45[11,4]
.89
[22,6]
.89
[22.6]
1.00[25,4]
2.00[50,8]
.38
[9,7]
.75
[19,1]
.156[3,96] DIA.
THRU 2 HOLES
2.38
[60,5]
.15
[3,8]
MATES WITH TYPE `TNC`
MALE CONNECTOR PER MIL-C-39012 4 PLCS
KDI
64537
D343MS
D/C
MATES WITH SMA MALE
CONN PER MIL-C-39012
MATES WITH TYPE`N`MALE
CONN PER MIL-C-39012
3 PLS
KDI
64537
D397LS
D/C
.375
.030
[9,53
0,76]
.75
[19,1]
.26
[6,6]
.59
[15,0]
2.00
[50,8]
3.00[76,2]
2.50[63,5]
1.50[38,1]
1.00
[25,4]
.270[6,86] DIA.
THRU 2 MTG HOLES
.50
[12,7]
1.00
[25,4]
2 PLS
.25
[6,4]
ELECTRICAL SPECIFICATIONS
Model: D364MS
Connectors: SMA
Frequency: 400-2000 MHz
Insertion Loss above 4.8 dB: 1.0 dB
Isolation: 14 dB Minimum
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 3 Maximum
VSWR: 1.35 Maximum
RF Power: 1 watt Maximum
Operating Temperature: 30 C to +70 C
ELECTRICAL SPECIFICATIONS
Model: D306NS
Connectors: SMA
Frequency: 1090 10 MHz
VSWR: 1.3:1 Maximum all ports
Isolation: 20 dB Minimum
Differential Loss from
J1 to J2 & J3: .3-.4 dB Typical
Insertion Loss: In to J2, J3: 0.5 dB above 4.8 dB
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 2 Maximum
RF Power: 1 watt Maximum (matched as divider)
Operating Temperature: 30 C to +70 C
ELECTRICAL SPECIFICATIONS
Model: D343MS
Connectors: TNC
Frequency: 850-900 MHz
Insertion Loss: 0.5 dB Maximum
Isolation: 20 dB Minimum
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 2 Maximum
VSWR: 1.3:1 Maximum for all ports
RF Power: 1 watt Maximum
Operating Temperature: 30 C to +70 C
ELECTRICAL SPECIFICATIONS
Model: D397LS
Connectors: SMA/N
Frequency: 800-900 MHz
VSWR: 1.2:1 dB Maximum
Isolation: 20.0 dB Minimum
Insertion Loss: 5.3 dB Maximum (incl. divide loss)
RF Power: 0.5 watts Minimum at combined port
Amplitude Balance: 0.2 dB Maximum
Phase Balance: 2 Maximum
Operating Temperature: 30 C to +70 C
© 2017 • ChipFind
Контакты
Главная страница