HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: V23818-C18-L36 (Infineon Technologies AG)

Small Form Factor Single Mode 1300 nm Multirate up to 155 Mbit/s Transceiver 2x5 Pinning with LC Connector

 

Скачать: PDF   ZIP
Infineon Technologies AG

Document Outline

Data Sheet
1
2003-06-06
Small Form Factor
Single Mode 1300 nm
Multirate up to 155 Mbit/s Transceiver
2x5 Pinning with LCTM Connector
V23818-C18-Lxx/L4xx
For ordering information see next page.
LC
TM
is a trademark of Lucent.
Fiber Optics
File: 1119
File: 1120
Features
Small Form Factor transceiver
Multisource 2x5 footprint, SFF MSA compliant
1)
Small footprint for high port density
RJ-45 style LCTM connector system
Half the size of SC Duplex 1x9 transceiver
Single power supply (3.3 V)
Extremely low power consumption, 600 mW typical
Leading performance for receiver sensitivity,
34 dBm typical
Loss of optical signal indicator
Laser disable, LVTTL input
LVPECL differential inputs and outputs
Suitable for multirate applications up to 155 Mbit/s
Fast Ethernet (FE) compatible
Class 1 FDA and IEC laser safety compliant
UL 94 V-0 certified
Compliant with FCC (Class B) and EN 55022
Distance up to 15 km/21 km on single mode fiber
(SMF)
2)
1)
Current MSA documentation can be found at www.infineon.com/fiberoptics.
2)
IR (Intermediate Reach): up to 15 km (ITU-T G.957), up to 21 km (Telcordia GR-253).
V23818-C18-Lxx/L4xx
Ordering Information
Data Sheet
2
2003-06-06
Ordering Information
Part Number
Range
1)
Signal
Detect
Temperature Data Outputs
if SD is Low
Collar In-
put
Out-
put
Stock Products
V23818-C18-L47
IR
LVTTL
0C...70C
Switched to Low yes
AC
AC
V23818-C18-L46
40C...85C
Products on Request
V23818-C18-L37
IR
LVPECL
0C...70C
Switched to Low yes
DC
DC
V23818-C18-L36
40C...85C
V23818-C18-L45
IR
LVTTL
0C...70C
Switched to Low no
AC
AC
V23818-C18-L49
40C...85C
V23818-C18-L35
IR
LVPECL
0C...70C
Switched to Low no
DC
DC
V23818-C18-L39
40C...85C
V23818-C18-L436 IR
LVPECL
40C...85C
Active
yes
DC
DC
1)
IR (Intermediate Reach): up to 15 km (ITU-T G.957), up to 21 km (Telcordia GR-253).
V23818-C18-Lxx/L4xx
Pin Configuration
Data Sheet
3
2003-06-06
Pin Configuration
Figure 1
Pin Description
Pin
No.
Symbol
Level/Logic
Description
1
V
EEr
Ground
Receiver signal ground
2
V
CCr
Power supply
Receiver power supply
3
SD
LVTTL or LVPECL output
1)
1)
LVPECL output active high for V23818-C18-L3x/L436.
LVTTL output active high for V23818-C18-L4x.
Receiver optical input level monitor
4
RD
LVPECL output
Receiver data out bar
5
RD+
LVPECL output
Receiver data out
6
V
CCt
Power supply
Transmitter power supply
7
V
EEt
Ground
Transmitter signal ground
8
TDis
LVTTL input
Transmitter disable
9
TD+
LVPECL input
Transmitter data in
10
TD
LVPECL input
Transmitter data in bar
MS
Mounting studs
HL
Housing leads
Tx
Rx
HL
HL
HL
HL
1 2 3 4 5
6
7
8
9
10
TOP VIEW
MS
MS
File: 1331
V23818-C18-Lxx/L4xx
Pin Configuration
Data Sheet
4
2003-06-06
V
EEr
/
V
EEt
Connect pins 1 and 7 to signal ground.
V
CCr
/
V
CCt
A 3.3 V
DC power supply must be applied at pins 2 and 6. A recommended power supply
filter network is given in the termination scheme. Locate power supply filtering directly at
the transceiver power supply pins. Proper power supply filtering is essential for good EMI
performance.
TD+ / TD
Transmitter data LVPECL level inputs. For V23818-C18-L4x terminated and AC coupled
internally. For V23818-C18-L3x/L436 use termination and coupling as shown in the
termination scheme.
RD / RD+
Receiver data LVPECL level outputs. For V23818-C18-L4x biased and AC coupled
internally. For V23818-C18-L3x/L436 use termination and coupling as shown in the
termination scheme.
TDis
A logical LVTTL high input will disable the laser. To enable the laser, an LVTTL low input
must be applied. Leave pin unconnected if feature not required.
SD
LVTTL output for V23818-C18-L4x. LVPECL output for V23818-C18-L3x/L436. A logical
high output indicates normal optical input levels to the receiver. Low optical input levels
at the receiver result in a low output. Signal Detect can be used to determine a definite
optical link failure; break in fiber, unplugging of a connector, faulty laser source. However
it is not a detection of a bad link due to data-related errors.
MS
Mounting studs are provided for transceiver mechanical attachment to the circuit board.
They also provide an optional connection of the transceiver to the equipment chassis
ground. The holes in the circuit board must be tied to chassis ground.
HL
Housing leads are provided for additional signal grounding. The holes in the circuit board
must be included and tied to signal ground.
V23818-C18-Lxx/L4xx
Description
Data Sheet
5
2003-06-06
Description
This data sheet describes the Infineon single mode ATM transceiver, which complies
with the ATM Forum's Network Compatible ATM for Local Network Applications
document and ANSI's Broadband ISDN - Customer Installation Interfaces, Physical
Media Dependent Specification, T1E1.2, compliant to SONET OC-3, IR-1 (Telcordia
GR-253-CORE) and SDH STM-1/S-1.1 (ITU-T G.957).
This transceiver is also suitable for multirate applications. The performance at lower
datarates may vary from application to application and is link dependent. Refer to
Infineon Application Note 97 for more information.
ATM was developed to facilitate solutions in multimedia applications and real time
transmission. The data rate is scalable, and the ATM protocol is the basis of the
broadband public networks being standardized in the International Telecommunications
Union (ITU), the former International Telegraph and Telephone Consultative Committee
(CCITT). ATM can also be used in local private applications.
The Infineon single mode ATM transceiver is a single unit comprised of a transmitter, a
receiver, and an LC receptacle. This design frees the customer from many alignment
and PC board layout concerns. The module is designed for low cost LAN and WAN
applications. It can be used as the network end device interface in workstations, servers,
and storage devices, and in a broad range of network devices such as bridges, routers,
and intelligent hubs, as well as local and wide area ATM switches.
This transceiver operates at up to 155.520 Mbit/s from a single power supply (+3.3 V).
The full differential data inputs and outputs are LVPECL compatible.
© 2017 • ChipFind
Контакты
Главная страница