HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: HMC361S8G (Hittite Microwave Corporation)

Smt Gaas Hbt Mmic Divide-by-2, Dc - 10.0 Ghz

 

Скачать: PDF   ZIP
Hittite Microwave Corporation
MICROWAVE CORPORATION
10 - 8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
DIVIDER & DETECT
ORS - SMT
10
HMC361S8G
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10.0 GHz
General Description
Features
Functional Diagram
The HMC361S8G is a low noise Divide-by-2
Static Divider with InGaP GaAs HBT technology
in an 8 lead surface mount plastic package. This
device operates from DC (with a square wave
input) to 10 GHz input frequency with a single
+5.0V DC supply. The low additive SSB phase
noise of -148 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance.
Ultra Low SSB Phase Noise: -148 dBc/Hz
Wide Bandwidth
Output Power: 3 dBm
Single DC Supply: +5V
S8G SMT Package
Electrical Specifi cations,
T
A
= +25 C, 50 Ohm System, Vcc= 5V
Typical Applications
Prescaler for DC to X Band PLL Applications:
Satellite Communication Systems
Fiber Optic
Pt-Pt and Pt-MPt Radios
VSAT
1. Divider will operate down to DC for square-wave input signal.
v02.1202
Parameter
Conditions
Min.
Typ.
Max.
Units
Maximum Input Frequency
10
11
GHz
Minimum Input Frequency
Sine Wave Input. [1]
0.2
0.5
GHz
Input Power Range
Fin = 1 to 8 GHz
-15
>-20
+10
dBm
Fin = 8 to 10 GHz
-10
>-15
+2
dBm
Output Power
Fin = 6 GHz
0
3
dBm
Fin = 10 GHz
-6
dBm
Reverse Leakage
Both RF Outputs Terminated
45
dB
SSB Phase Noise (100 kHz offset)
Pin = 0 dBm, Fin = 6 GHz
-148
dBc/Hz
Output Transition Time
Pin = 0 dBm, Fout = 882 MHz
100
ps
Supply Current (Icc)
83
mA
MICROWAVE CORPORATION
10 - 9
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ.
DIVIDERS & DETECT
ORS - SMT
-30
-20
-10
0
10
20
0
1
2
3
4
5
6
7
8
9
10
11
12
13
INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-30
-20
-10
0
10
20
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
11
12
13
+25 C
+85 C
-40 C
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-160
-140
-120
-100
-80
-60
-40
-20
0
10
2
10
3
10
4
10
5
10
6
10
7
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
GaAs MMIC SUB-HARMONICALLY PUMPED MIXER 17 - 25 GHz
HMC361S8G
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 C
Input Sensitivity Window, T= 25 C
Input Sensitivity Window vs. Temperature
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10.0 GHz
Output Power vs. Temperature
Recommended
Operating Window
-50
-40
-30
-20
-10
0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Pfeedthru
3rd Harmonic
OUTPUT LEVEL (dBm)
INPUT FREQUENCY (GHz)
-50
-40
-30
-20
-10
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
Both Output Ports Terminated
One Output Port Terminated
POWER LEVEL (dBm)
INPUT FREQUENCY (GHz)
Reverse Leakage, Pin= 0 dBm, T= 25 C
Output Harmonic
Content, Pin= 0 dBm, T= 25 C
v02.1202
MICROWAVE CORPORATION
10 - 10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
DIVIDER & DETECT
ORS - SMT
10
-500
-400
-300
-200
-100
0
100
200
300
400
500
22.7 22.9 23.1 23.3 23.5 23.7 23.9 24.1 24.3 24.5 24.7
AMPLITUDE (mV)
TIME (nS)
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 C
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10.0 GHz
HMC361S8G
Absolute Maximum Ratings
Outline Drawing
Typical Supply Current vs. Vcc
Note: Divider will operate over full voltage range shown above
v02.1202
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
RF Input (Vcc = +5V)
+13 dBm
Vcc
+5.5V
VLogic
Vcc -1.6V to Vcc -1.2V
Storage Temperature
-65 to +150 C
Operating Temperature
-40 to +85 C
Vcc (V)
Icc (mA)
4.75
74
5.0
83
5.25
89
MICROWAVE CORPORATION
10 - 11
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ.
DIVIDERS & DETECT
ORS - SMT
Pin Number
Function
Description
Interface Schematic
1
OUT
Divided output 180 out of phase with pin 3.
2, 6
N/C
No connection. These pins must not be grounded.
3
OUT
Divided Output.
4
VCC
Supply voltage 5V 0.25V.
5
IN
RF Input must be DC blocked.
7
IN
RF Input 180 out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8
GND
Ground Backside of package has exposed metal ground slug which
must be connected to ground.
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10.0 GHz
HMC361S8G
Pin Description
v02.1202
MICROWAVE CORPORATION
10 - 12
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
DIVIDER & DETECT
ORS - SMT
10
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10.0 GHz
HMC361S8G
The circuit board used in the fi nal application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
and backside ground slug should be connected directly
to the ground plane similar to that shown. A suffi cient
number of via holes should be used to connect the top
and bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request. This evalu-
ation board is designed for single ended input testing. J2
and J3 provide differential output signals.
Evaluation PCB
List of Materials
v02.1202
Item
Description
J1 - J3
PC Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0603 Pkg.
C6
10 F Tantalum Capacitor
U1
HMC361S8G Divide-by-2
PCB*
104627 Eval Board
* Circuit Board Material: Rogers 4350
MICROWAVE CORPORATION
10 - 13
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10
FREQ.
DIVIDERS & DETECT
ORS - SMT
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 10.0 GHz
HMC361S8G
Application Circuit
v02.1202
© 2020 • ChipFind
Контакты
Главная страница