HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: HMC156 (Hittite Microwave Corporation)

Gaas Mmic Passive Frequency Doubler, 0.7 - 2.4 Ghz Input

 

Скачать: PDF   ZIP
Hittite Microwave Corporation
MICROWAVE CORPORATION
4 - 2
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
MUL
TIPLIERS - CHIP
4
HMC156
GaAs MMIC PASSIVE FREQUENCY
DOUBLER, 0.7 - 2.4 GHz INPUT

v03.1203
General Description
Features
Functional Diagram
Conversion Loss: 15 dB
Fo, 3Fo, 4Fo Isolation: 38 dB
Input Drive Level: 10 to 20 dBm
Electrical Specifi cations,
T
A
= +25 C, As a Function of Drive Level
Typical Applications
The HMC156 is suitable for:
Wireless Local Loop
LMDS, VSAT, and Pt to Pt Radios
UNII & HiperLAN
Test Equipment
The HMC156 is a miniature frequency doubler
in a MMIC die. Suppression of undesired fun-
damental and higher order harmonics is 38 dB
typical with respect to input signal levels. The
doubler uses the same diode/balun technology
used in Hittite MMIC mixers, features small size
and requires no DC bias.
Input = +10 dBm
Input = +15 dBm
Input = +20 dBm
Parameter
Min.
Typ. Max.
Min.
Typ. Max.
Min.
Typ. Max.
Units
Frequency Range, Input
1.1 - 2.1
0.8 - 2.4
0.7 - 2.3
GHz
Frequency Range, Output
2.2 - 4.2
1.6 - 4.8
1.4 - 4.6
GHz
Conversion Loss
17
22
15
20
15
20
dB
FO Isolation
(with respect to input level)
42
47
43
47
27
35
dB
3FO Isolation
(with respect to input level)
45
55
44
55
29
40
dB
4FO Isolation
(with respect to input level)
28
38
31
38
25
35
dB
MICROWAVE CORPORATION
4 - 3
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
MUL
TIPLIERS - CHIP
4
-40
-30
-20
-10
0
1
1.5
2
2.5
3
3.5
4
4.5
5
Input=+10dBm
Input=+15dBm
Input=+20dBm
CONVERSION GAIN (dB)
OUTPUT FREQUENCY (GHz)
HMC156
Conversion Gain vs. Drive Level
Isolation @ +15 dBm Drive Level*
Input Return Loss vs. Drive Level
Output Return Loss @ +15 Drive Level
v03.1203
GaAs MMIC FREQUENCY
DOUBLER, 0.7 - 2.4 GHz INPUT

*With respect to input level
-100
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
0
1
2
3
4
5
6
7
8
9
10
Fo
3Fo
4Fo
ISOLATION (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0
1
2
3
4
5
Input=+10dBm
Input=+15dBm
Input=+20dBm
INPUT RETURN LOSS (dB)
INPUT FREQUENCY (GHz)
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
0
1
2
3
4
5
OUTPUT RETURN LOSS (dB)
OUTPUT FREQUENCY (GHz)
MICROWAVE CORPORATION
4 - 4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
MUL
TIPLIERS - CHIP
4
Absolute Maximum Ratings
Outline Drawing
v03.1203
HMC156
NOTES:
1. ALL UNLABELED PADS MUST BE BONDED TO GROUND (8 TOTAL).
2. ALL DIMENSIONS IN INCHES [MILLIMETERS]
3. ALL TOLERANCES ARE 0.001 [0.025]
4. DIE THICKNESS IS 0.005 [0.127]
5. BOND PADS ARE 0.004 [0.100] SQUARE
6. EQUALLY SPACED AT 0.006 [0.150] CENTERS
7. BACKSIDE METALLIZATION: NONE
8. BOND PAD METALLIZATION: GOLD
GaAs MMIC FREQUENCY
DOUBLER, 0.7 - 2.4 GHz INPUT

Input Drive
+27 dBm
Storage Temperature
-65 to +150 C
Operating Temperature
-55 to +85 C
MICROWAVE CORPORATION
4 - 5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
FREQ.
MUL
TIPLIERS - CHIP
4
v03.1203
HMC156
GaAs MMIC FREQUENCY
DOUBLER, 0.7 - 2.4 GHz INPUT

Handling Precautions
Follow these precautions to avoid permanent damage.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid clean-
ing systems.
Static Sensitivity: Follow ESD precautions to protect against > 250V ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and
bias cables to minimize inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent
tweezers. The surface of the chip has fragile air bridges and should not be touched with vacuum collet,
tweezers, or fi ngers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or
with electrically conductive epoxy. The mounting surface should be clean and fl at.
Epoxy Die Attach:
Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fi llet is observed around
the perimeter of the chip once it is placed into position.
Cure epoxy per the manufacturer's schedule.
Wire Bonding
Ball or wedge bond with 1.0 diameter pure gold wire. Thermosonic wirebonding with a nominal stage tem-
perature of 150 C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams
is recommended. Use the minimum level of ultrasonic energy to achieve reliable wirebonds. Wirebonds
should be started on the chip and terminated on the package. RF bonds should be as short as possible.
© 2020 • ChipFind
Контакты
Главная страница