HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: IA12ALC03AG-K (Carlo Gavazzi Automation)

Analogue Current Output (0.1 - 3 mm)

 

Скачать: PDF   ZIP
 
Specifications are subject to change without notice (20.08.01)
1
Type: Ind. prox. switch
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Types IA, M8, M12, M18 and M30
Analogue Current Output, Nickel-plated Brass Housing
Proximity Sensors Inductive
Nickel-plated brass housing
Housing diameter: 8, 12, 18 and 30 mm
Sensing distance: M8: 0.1 - 1.5 mm
M12: 0.1 - 3 mm
M18: 0.1 - 6 mm
M30: 0.5 - 10 mm
Power supply: 18 to 30 VDC
Output: 20 - 4 mA
Protection degree IP67
2 m PVC cable
Product Description
Inductive proximity sensor
with analogue 20-4 mA cur-
rent output. The analogue
signal can be directly con-
nected to measuring sys-
tems. Nickel-plated brass
housing in 4 sizes. Connec-
tion with 2 m PVC cable.
Type Selection
Detecting Housing Connection
Ordering
no.
range dimensions
Analogue
Current
Output
PNP, 20-4 mA
0.1 - 1.5 mm
M8
Cable, 2 m
IA 08 ALC 15 AG-K
0.1 - 3.0 mm
M12
Cable, 2 m
IA 12 ALC 03 AG-K
0.1 - 6.0 mm
M18
Cable, 2 m
IA 18 ALC 06 AG-K
0.5 - 10 mm
M30
Cable, 2 m
IA 30 ALC 10 AG-K
All types for flush mounting in metal
Specifications
Rated operational volt. (U
B
)
18 to 30 VDC (ripple included)
Ripple
10%
Output current (I
e
)
20 - 4 mA, PNP
No-load supply current (I
o
)
35 mA
Load
< 400
Detecting range
IA 08:
0.1 - 1.5 mm
IA 12:
0.1 - 3.0 mm
IA 18:
0.1 - 6.0 mm
IA 30:
0.5 - 10 mm
Conformity
< 10%
Temperature drift
< 5%
Ambient temperature
Operating
0 to +50C (32 to +122F)
Storage
-30 to +75C (-22 to +167F)
Degree of protection
IP 67 (Nema 1, 3, 4, 6, 13)
Housing material
Nickel-plated brass
CE-marking
Yes
Connection
Cable
2 m, PVC, AWG 26
Ordering Key
IA 18 ALC 10 AG-K
2
Specifications are subject to change without notice (20.08.01)
IA M8, M12, M18, M30
IA 08 ALC 15 AG-K
IA 12 ALC 03 AG-K
Dimensions
M18 x 1
55
M30 x 1,5
55
IA 18 ALC 10 AG-K
IA 30 ALC 15 AG-K
M8 x 1
45
M12 x 1
50
Installation Hints
Relief of cable strain
Protection of the sensing face
Switch mounted on mobile carrier
To avoid interference from inductive voltage/
current peaks, separate the prox. switch pow-
er cables from any other power cables, e.g.
motor, contactor or solenoid cables
Incorrect
Correct
The cable should not be pulled
A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
Wiring Diagram
+
-
1 BN
3 BU
2 BK
Nominal Output Characteristic
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
4
20
8
12
16
18
14
10
6
S
n
/S
n max
mA
Sensing distance
© 2017 • ChipFind
Контакты
Главная страница