HTML datasheet архив (поиск документации на электронные компоненты) Поиск даташита (1.687.043 компонентов)
Где искать

Datasheet: 0100MS (Burr-Brown Corporation)

Emi Shield

 

Скачать: PDF   ZIP
Burr-Brown Corporation
International Airport Industrial Park Mailing Address: PO Box 11400 Tucson, AZ 85734 Street Address: 6730 S. Tucson Blvd. Tucson, AZ 85706
Tel: (520) 746-1111 Twx: 910-952-1111 Cable: BBRCORP Telex: 066-6491 FAX: (520) 889-1510 Immediate Product Info: (800) 548-6132
100MS
EMI SHIELD
FIGURE 1. Cross-Sectional Side View of 100MS.
FIGURE 2. Assembly Diagram.
DESCRIPTION
The 100MS is an epoxy encapsulated electromagnetic/
electrostatic interference (EMI) shield for use with
circuits where sensitivity to EMI is critical. It was
designed to attenuate EMI by converting electromag-
netic field energy into heat that is absorbed by the
shield and by shunting electrostatic fields to common.
The 100MS may be used in applications to either
confine or exclude EMI. Its cavity was designed for
28.45mm
x
28.45mm
x
7.24mm, 20-pin hybrid pack-
ages. The shields in the cover and base plate are in two
separate halves to maintain the electrical isolation
between the adjacent rows of pins of the module it
encloses. Because of the spacing between the shield
halves and epoxy flow holes, the 100MS provides a
partial, but adequate low reluctance path for electro-
magnetic flux. The 100MS is well suited for use with
isolation modules such as the Burr-Brown 3656, 722,
and 724.
ASSEMBLY INSTRUCTIONS
Assemble the base plate to the module by pushing the
pins of the module through the beveled holes in the
base plate until the base plate and bottom of the
module are in contact with each other. Place the cover
over the module so the tabs are aligned and fit into the
slots in the base plate. Bend the four wide shield
soldering tabs protruding from the cover to make
contact with the bare metal on the base plate. Solder
these four tabs to insure the integrity of their connec-
tion to the base plate.
The 100MS and the module it contains are mounted
and secured to a printed circuit board (PCB) by solder-
ing the two narrow PCB solder tabs to the appropriate
common. The PCB solder tab closest to the input side
of the module should be soldered to the input com-
mon. The other tab should be soldered to the output
common. Figure 2 illustrates the assembly of the
100MS.
Base Plate
Module
(reference only)
PCB Solder Tab
Shield Solder Tab
Cover
Shield
Solder Tab
V
ISO
Epoxy Encapsulant
Connection to
Input Common
Connection to
Output Common
V
ISO
= Isolation Voltage
Base Plate Shield
Half Cover Shield
Half Cover Shield
1979 Burr-Brown Corporation
PDS-421A
Printed in U.S.A. October, 1993
SBFS013
2
100MS
100MS
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
Isolation Voltage
Rated Continuous, DC
3500
VDC
Rated Continuous, AC
2000
Vrms
Test
10 Seconds
8000
VDC
Capacitance
5
pF
Resistance
10
10
Leakage Current
120V, 60Hz
0.23
A
NOTE: Temperature changes (
T/
t) greater than 1
C per minute below 0
C and long term storage above 100
C are not recommended.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
SPECIFICATIONS
ELECTRICAL
Specifications apply between solder tabs.
APPLICATIONS INFORMATION
MULTIPLE DEVICE ORIENTATION
A typical application for the 100MS is shown in Figure 3.
Using multiple devices within 30mm of each other can
cause them to interact by forming beat frequency interfer-
ence outputs. The 100MS can reduce this interference by as
much as a factor of 200:1 depending on the distance be-
tween the devices and their relative orientation.
Minimum EMI results when the gaps of both shields are
paralleled as in Figure 3a.
PACKAGE INFORMATION
(1)
PACKAGE DRAWING
MODEL
PACKAGE
NUMBER
100MS
EMI Shield
124
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix D of Burr-Brown IC Data Book.
10 0 M S
G a p i n S h i e l d
10 0 M S
G a p i n S h i e l d
( a ) O p t i m u m P C B L a y o u t .
FIGURE 3a. Optimum PCB Layout. Orientation for mini-
mum EMI.
Power
Supply
Common
G = 100
15
9
19
V
OUT1
2
6
7
3
19.6k
10
2M
20k
Thermocouple #1
20
17
16
12
C
(1)
100k
14
11
2M
+V
CC
Power
Supply
Common
3656
G = 100
15
9
19
V
OUT2
2
6
7
3
19.6k
10
2M
20k
Thermocouple #2
20
17
16
12
C
(1)
100k
14
11
2M
+V
CC
NOTE: (1) C = 0.47F.
3656
C
(1)
C
(1)
13
C
(1)
C
(1)
13
FIGURE 3b. Isolated Data Acquisition Input Circuitry. Orien-
tation for Minimum EMI.
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
(2)
Lead/Ball Finish
MSL Peak Temp
(3)
0100MS
ACTIVE
PDIP
NSP
20
25
None
Call TI
Level-NA-NA-NA
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check
http://www.ti.com/productcontent
for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com
9-Dec-2004
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI's terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright
2004, Texas Instruments Incorporated
© 2017 • ChipFind
Контакты
Главная страница